How does the automatic deburring machine dispose of metal equipment?

How does the automatic deburring machine dispose of metal equipment?

The automatic deburring machine uses super electromagnetic force to conduct small grinding stainless steel needles to produce high-speed jumping flow, adjustment and other actions, rubbing on the inner hole, dead corner, and joint surface of the workpiece, and effectively achieve the precise grinding effect of grinding and removing burrs at one time. .

Every time we turn on the automatic deburring machine, we will put the workpiece into the polishing bucket from less to less. The number of workpieces is related to the weight and the size of the workpieces. Therefore, the workpiece gradually increases, the rotation of the inverted workpiece slows down, but the workpiece cannot move. When the workpiece is not moving, the polished product liquid will be uneven and the polishing time will be unnecessary.

The key to operating a fully automatic deburring machine is to try to get the maximum polishing in order to remove the damage layer produced during the polishing process as soon as possible. At the same time, the polishing damage layer will not affect the final observed tissue, that is, it will not cause false tissue. The former requires the use of coarser abrasive materials to ensure a higher polishing rate to remove the abrasive damage layer, but the abrasive damage layer is also deeper; the latter requires the use of the finest material, so that the abrasive damage layer is shallower, but the polishing speed is lower . The best way to solve this contradiction is to divide the grinding into two stages. The purpose of rough polishing is to remove the abrasive damage layer, followed by fine polishing. Its purpose is to remove the surface damage caused by rough polishing and minimize the abrasive damage.

The automatic deburring machine is widely used in precision parts such as light iron metals, non-ferrous metals, and hard plastics. Finished products of precision parts such as light iron metals, non-ferrous metals, hard plastics, etc., can complete precision grinding operations such as burrs, chamfers, burrs, grinding, and cleaning at one time. Irregular parts, holes, pipes, dead corners, gaps, etc. can be ground The processing speed is fast, the operation is simple and safe, the cost is low, and the finished product is not deformed after processing, and does not affect the accuracy.