The purpose and equipment structure of the sheet metal deburring machine

The machine is mainly used to remove serious holes, grooves, and any processed end flanging and burrs of special-shaped structural parts after hardware processing. Such as saw blades, laser cutting, machining, including stamping Removal of burrs and extra parts of sheet metal deformation. Processing on the basis of not damaging the size of the workpiece, the outer surface of other special specification parts can be deburred, which can increase the design structure tofor manufacturing, the equipment can adopt 16 work stations. Composed of one or more owners. The more owners, the higher the processing efficiency.

Can control the deburring at the same time to the fillet radius from R0.02mm to R0.50mm, the error is relatively small.

From 1 to multiple stations (passivation host) in the same line, continuous plane universal continuous processing, forming a deburring part processing line. Or large working disc table, the difference is flow The line may require two people to work from the beginning to the end to pick up the parts, while the disc working line is only one person, and one work piece is taken off by the way when the work is being carried out.

The interior of the equipment can be adjusted automatically according to the deburring position and height of the parts, and even more deburring tools can be installed to remove the burrs on the outer surface of the parts at one time.

Then the parts can be polished according to customer requirements. Deburring and polishing are completed at one time, and the parts are continuously deburred.

Time, speed, strength, parameters (set on the upper computer panel of the operation surface, and can be modified at any time), including memory, open the data to complete the setting.

The equipment uses multiple stations for automatic indexing and positioning. Except for manual loading and unloading, the rest of the work can be completed automatically, because multiple stations are used for simultaneous processing.

The cycle period is very short and the processing efficiency is high.

Deburring method settings: including data, efficiency, and effects. There are many options for adjustment due to different nature of burrs and different materials. For example, when turning over, the machine owner usually adopts a cutting force method.

Because it is an automatic processing method, the effect of deburring can be kept consistent, including color differences, can be unified, no omissions and over trimming appear, and a certain fillet and chamfer can be maintained.

According to the craft set by oneself.